+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: Firmware / Manual (https://forum.xor.eu/forumdisplay.php?fid=11)
+---- Thread: Release Candidate Firmware V1.18 (RC3 UPDATE) (/showthread.php?tid=285)
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-05-2019
I just updated to RC 2 with the follwing updates/fixes/changings:
V1.18 RC2 Update:
- fixed bug in tables where a table in track 6 could cause trigger 1 to trigger
- fixed interference in automation modulation matrix with the new sample preview feature
- changed in MOD column instead of using OK to switch between note and MOD values. Need SHIFT+OK from now
- Added prelisten function for MOD column as well now using the OK button. If both MOD - note and Note column are filled in, then 2 notes can be prelistened.
The Hex file in the main post is updated to RC2.
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - Kitchentone - 02-05-2019
HI , thanks , cool , but I don't find the HEX file in the main post
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - herve.b - 02-06-2019
Dyn-sync bug : If the dyn-sync clock is already running and i switch the input to dyn-sync in the /Project/Clock in/ menu, Nerdseq reset completely . (RC1)
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-06-2019
(02-06-2019, 09:33 AM)herve.b Wrote: Dyn-sync bug : If the dyn-sync clock is already running and i switch the input to dyn-sync in the /Project/Clock in/ menu, Nerdseq reset completely . (RC1)
Emtpy project? No pattern yet?
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - herve.b - 02-06-2019
(02-06-2019, 09:36 AM)XORadmin Wrote:(02-06-2019, 09:33 AM)herve.b Wrote: Dyn-sync bug : If the dyn-sync clock is already running and i switch the input to dyn-sync in the /Project/Clock in/ menu, Nerdseq reset completely . (RC1)
Emtpy project? No pattern yet?
Empty project / no pattern
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-06-2019
(02-06-2019, 09:47 AM)herve.b Wrote:(02-06-2019, 09:36 AM)XORadmin Wrote:(02-06-2019, 09:33 AM)herve.b Wrote: Dyn-sync bug : If the dyn-sync clock is already running and i switch the input to dyn-sync in the /Project/Clock in/ menu, Nerdseq reset completely . (RC1)
Emtpy project? No pattern yet?
Empty project / no pattern
Ok yes, it starts playing then but there is nothing to play so it ends up playing something 'out of scope' which causes the crash. I had something similar with midi. I will fix that, for now, just press once OK to make a pattern before that, then there is no issue. You won't also have any problems with any projects as long as there is at leat one pattern. So no problem.
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - Barney Rubble - 02-06-2019
Did RC2 get pulled - I can't see it in this thread?
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-06-2019
(02-06-2019, 10:29 AM)Barney Rubble Wrote: Did RC2 get pulled - I can't see it in this thread?
Oh hehe....i must press the upload button
Done. It's back up there.
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - Barney Rubble - 02-06-2019
RC2 Some observations -:
1 Loading update the screen said something like SD Card was empty ? blah blah - but process continued and update was successful
2 Loaded project from RC1 and project loaded at 1bpm should have been 120bpm
Otherwise seems to be ok at the mo
cheers
b
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-06-2019
(02-06-2019, 08:39 PM)Barney Rubble Wrote: RC2 Some observations -:
1 Loading update the screen said something like SD Card was empty ? blah blah - but process continued and update was successful
2 Loaded project from RC1 and project loaded at 1bpm should have been 120bpm
Otherwise seems to be ok at the mo
cheers
b
1 - When only powering on the NerdSEQ, it can be that the SD card needs more time to start up. Just hold the buttons until it works well after a retry. That has nothing to do with RC2
2 - Are you sure? There is no difference in that from RC1. So if you saved in RC1 or older versions with 120 bpm, it should load with RC2 on 120 bpm. Or did you have external sync?